After the plate cooler is used for a period of time, there will be a thick layer of dirt in the tube, then this requires us to perform maintenance and cleaning on a regular basis. The correct cleaning of the cooler product is an important step. .
Plate cooler The SUPERCHANGER plate heat exchanger for copper processing has two cleaning methods: manual cleaning and in-situ cleaning. If conditions are available, the in-situ cleaning system should be used as much as possible, because the in-situ cleaning system can pump water (or cleaning solution) into the inside of the device without disassembling the heat exchanger. If the in-situ cleaning system is not practical for your plant, you can clean the device manually. The following will briefly discuss the in-situ cleaning and cleaning steps.
Precautions for plate cooler plate cleaning
(1) Do not wash the stainless steel plate with hydrochloric acid or water with chloride concentration exceeding 300 × 10-6.
(2) Do not use phosphoric acid or sulfuric acid to clean the titanium plate.
(3) Generally, the concentration of the cleaning solution should be below 4% (except in special cases), and the temperature of the cleaning solution should not exceed 60 ° C.
For more details, please consult: cooler, plate cooler
, please consult: our official website: http://uocaw.com